I received a tip via a forum member that the P2 chassis Volvo’s (S60 / V70 / S80) have builtin US lights functionality. The EU models only need a different bulb + bulb holder for the side indicators.
Looks absolutely great in combination with the projectors.
Partnr: 9178546 (bulb holder)
Partnr: 989790 (amber p21/8w bulbs)
Bought a retrofit projector kit which will be fitted in OEM Volvo headlights for my S80. This will ensure that using HIDs or LED will not blind other drivers. The projector kit was sourced from Aliexpress. They are bixenon, but you can just snip off the wires as this functionality is not needed in the S80. The high beams are a separate H7 bulb.
Highly recommended, fitting them is quite easy. There is no butyl or permaseal used on these headlights. Only a small number of metal clips are used to gain access to the headlight internals.
I bundled them with H1 Led units, there give a tremendous amount of light without disturbing other road users.
The images should speak for themselves. If not, leave a comment!
Snip away some of the material as shown.
The end result looks good, very happy with the results
Bought a Teflon (PTFE) intake spacer for the intake manifold from Thermatec. It will isolate the intake manifold from the warm engine, which will result in lower intake temperatures. The phenolic spacers are identical in function, only the material used is different.
Lowering the Intake Air Temperature (IAT), will result in higher power figures. A simple supporting mod, which is quite inexpensive.
Pro tip: make a small indentation in the top left corner of the spacer where the bolt would go through the spacer/gasket (where the thermostat housing is), this will make the installation a lot easier due to the restricted space in that area.
Bought a upgrade for the subframe. The polyurethane bushings are inserted into the rubber subframe bushings, which tightens them up and limit the movement in them.
Highly recommended from a performance point of view (night and day difference when cornering). But be aware, they do introduce vibrations into the cabin. It will take some time before these settle and the vibration will be lower in the end.
Added Window Spoilers to the Volvo S80, I like the look but also they lower the wind noise when driving with open windows.
Also if it rains, you are still able to drive around with open windows, without any water ingress. And in the hot summers, you can safely let your windows down a little to stop the heat from building up in the car.
When I wanted to mount the TD04HL-16T turbo, I also wanted to couple it with the Japanifold, that should give good performance, but also the distinctive rumble of the 5 cilinder engine. I scored one via internet for a good price. The quality is immaculate, as they can handle a lot of abuse before they even start cracking.
But in the end I sold it, because my 2.4T already had the Japanifold fitted, so happy days 🙂 !
They are made in Japan, hence the name “Japanifold”. Partnr: 9207688
Bought a new BSR Optiflow kit as I wanted a little bit more blowoff + compressor noise. I can also fit my Velocity Stack filter (150mm diameter).
It has been sold in the meantime as the extra induction noise does not fit the S80 to be honest.
BSR Kit: 4900705
Max HP: 410 HP
- Mercedes CLS55 AMG W219 – Worn Serpentine Belt Tensioner Pulley (YouTube)
- Mercedes CLS55 AMG W219, New Serpentine Belt Tensioner
- Mercedes CLS55 AMG W219, Installing The Best Supercharger Belt, The Gates K080507RPM
- Mercedes CLS55 AMG W219, Autumn Exhaust Run
- Mercedes CLS55 AMG W219, 1 Picture Photoshoot 16-10-2022
- Mercedes CLS55 AMG W219, New Exide AGM 12-12 Aux (Auxiliary) Battery
- Mercedes CLS55 AMG W219, Kreezi RX11 Pro Phone Holder Mount