Tag: superpro

Volvo S80 2.4T – Seat Online Brabomeeting 26-05-2019

Made some flyby shots of my daily Volvo s80 2.4T which has some modifications as it is being prepared for a stage 3 tune (swapping the 13T over for a 16T T5 turbo).

Film was shot during a meeting from forum Seat-Online.nl , which was held on 26-05-2019.

Mod list:

  • DO88.se Silicone Turbo Intake Pipe
  • DO88.se Silicone Intercooler Hoses
  • Pierburg HD Porsche TCV
  • BSR 3″ inch Downpipe with Sportcat
  • Rakaror 3″ inch Stainless Exhaust
  • ProPerfekt CBV / Diverter Valve
  • Mamba Wastegate Actuator 0.3 BAR
  • SuperPro Engine Mount
  • Polyurethane Gearbox Mount
  • Polyurethane Subframe Inserts
  • Full Stage 0 tune

Location: Flight Forum Eindhoven




Volvo S80 2.4T IPD Polybush Upper Engine Stabilizer

Cheap and easy mod for a little bit more stability, polybush inserts for the upper engine stabilizer.

Volvo S80 2.4T Polyurethane Upper Engine Stabilizer




Volvo S80 2.4T Replacing the Upper Engine Mount with SuperPro Polybush

I noticed that when lifting off (like shifting), there was a lot of movement / play in the engine / gearbox. So when I inspected the upper engine mount, I found the root cause rather quickly. The rubber deteriorated and there wasn’t much left of the original rubber bushing.

Having read the other options, like fitting a polybush, I went with the SuperPro version which looked like a good bit of kit. Mounting the new polyurethane kit was quite a breeze. Fortunately, the original bushing has a plastic ring 🙂 The SuperPro kit consists of 2 pieces, which makes the mount very easy to replace.

Result: a much better shifting car, putting the power down goes a lot better now. I will also replace the bottom gearbox mount with a polyurethane version soon.

Very easy job to do at home. This also applies to the S60 and V70, as these are quite identical.

Broken upper engine mount…

Volvo S80 2.4T worn engine mount

Tearing it down

Volvo S80 2.4T Removing the Upper Engine Mount OEM bushing

Volvo S80 2.4T Upper Engine Mount shot OEM bush

Comparing old to new

Volvo S80 2.4T Polyurethane Upper Engine Mount vs OEM top view

Volvo S80 2.4T Polyurethane Upper Engine Mount vs OEM side view

Et voila!

Volvo S80 2.4T Polyurethane Upper Engine Mount completed